If the product does not operate, please check the following:
① The Chamber Set Assembly
The juicer will not power up with the juicer body alone. Please fully assemble the chamber set on a flat surface first, then place it onto the juicer body.
② The Power Connection
Ensure the power cord is firmly connected to the back of the juicer body as well as the electrical outlet. When you gently wiggle the cord, it should not move. If it is firmly in place, please test another wall socket to rule out an issue with the outlet.
③ Assembly Status Check
If the chamber set is not assembled correctly, the built-in safety sensors will not align, and the unit will not power up. Please refer to your juicer manual to ensure all parts are assembled and installed correctly.
④ Check the Hopper Lid
If the lid is not fully closed, the safety sensor will not activate. Be sure to press the hopper lid down until you hear a clear “click.” If you find that any part of the hopper or lid is damaged, please reach out to us via Contact us > General inquiries. 연락 요청 – 휴롬
⑤ Auger Installation
If the multi-auger inside the chamber is not installed, the juicer may still power up and a “humming” or “whirring” sound may be heard. However, the unit will not function properly—the hopper blade will not rotate, and ingredients will not be crushed.
⑥ Overheating Protection
The recommended continuous operating time is 30 minutes (15 minutes for the H310A model). Beyond this limit, the motor may temporarily stop as a safety measure to prevent overheating. If this happens, allow the unit to cool down sufficiently before restarting. For large-volume juicing, we recommend disassembling and rinsing the parts between sessions for smoother operation.
Product : H80ST, H320N, H70ST, H330P, E50ST, E30ST, H400, H70FT, H310A, CP50, H200, H201
