① If the juicer has stopped after extended use (beyond 25-30 minutes continuously)
The product may temporarily stop to prevent the motor from overheating. The recommended operating time is about 30 minutes (Please note: 15 minutes for the H310A model). If the unit stops, let the motor cool sufficiently (for at least 30 minutes to 1 hour) before powering it up again. For large-volume "Batch" juicing, please be sure to disassemble and rinse the internal parts between runs for smoother operation.
② If the juicer has stopped because ingredients are "jammed"
Fibrous ingredients may have become lodged inside the chamber, causing the motor to "stall" and shut down. In this case, press and hold the Reverse (REV) button for up to 5 seconds, then disassemble and remove any stuck fibers before washing the parts.
③ If the juicer has stopped because an improper tool or object was inserted
If anything other than the dedicated pusher (e.g., spoon, knife, spatula) has entered the juicer, immediately disengage the power switch. Do not forcibly disassemble the parts. Please reach out to us as soon as possible via Contact us > General inquiries to report the incident and receive guidance. Contact us – Hurom
Product : H80ST, H320N, H70ST, H330P, E50ST, E30ST, H400, H70FT, H310A, CP50, H200, H201
